The world
on a dial.
My RSP1A. My wire antenna. Your curiosity.
Pick a band, turn the dial, and listen in. This is a real receiver at my station—not a recording.
Flex time scans local repeaters and calling channels. Manual tuning gets 30 minutes idle; scheduled nets use 5 minutes.
DRAG TO TUNE
ARROW KEYS WORK TOO
Drag the knob or use the slider. Boost lifts quiet signals.
Open audio. Raise until idle noise disappears.
Press LISTEN to connect and start audio.
Use AUDIO to mute or unmute.
Your tuning.
A shared front end.
Listen independently inside the current capture window. A band change or a tune outside that window retunes the physical receiver for everyone. Sessions end after 60 minutes; reconnect if you’re still listening.
1 kHz–2 GHz receive coverage. HF, shortwave, VHF, UHF, and the space between. 2.4 and 5 GHz Wi-Fi are outside the hardware range and rejected by the receiver service. What you hear depends on the antenna, conditions, and local signals.
GMRS memories are listening presets; no repeater link or transmit control is provided.
Powered by OpenWebRX+ ↗Receiver source ↗Take the dial.
Tap TUNE for a manual override. Auto resumes after 30 minutes idle during flex scanning, or 5 minutes during scheduled nets. Calling channels are simplex memories, separate from repeaters. Digital-only traffic may not decode here.
| STATION / CHANNEL | MHz / MODE | TUNE |
|---|
Times shown in Mountain Time. OMISS follows UTC. Local nets take priority over overlapping HF windows. Windows are listening allocations, not guaranteed net lengths; frequencies can move. The 3.868 morning watch is tentative. OMISS schedule ↗
GMRS channels.
Tap a channel to select its frequency and NFM detector. This may retune the shared receiver.